SHINRAIO PCI-E to PCI-E Adapter 1 to 4 PCI-Express Slot 1x to 16x USB 3.0 Mining Riser PCIe Converter PCIE Riser for BTC/ETH Miner Mining
- 【Compatibility】This item is Compatible with HiveOS, NiceHash, Windows, Linux
- 【Stability】The main board adopts the PCI-E interface and the direct power supply mode does not need an external power supply, so that the main board power is free from external interference
- 【Convenience】Solve the quantity of port of PCI-E , 1 port can be extended to 4, one line directly to the port, effectively reduce the loss of interface interference and wire.
- 【Efficiency】Reduce the number of adapter and adapter line, one line directly to the interface, effectively reduce interface interference and wire loss, to ensure data reliability, so as to improve work efficiency
- Condition: Brand New
- Certification: CE
- Size: 12cm x 6.6cm x 5.6cm (4.72in x 2.6in x 2.2in)
- Compatible For: HiveOS, NiceHash, Windows, Linux.
- Package Include: 1 single card (1x 4 in 1 Adapter board) Description:
Product Installation Instructions:
1. The first step, when you use the adapter card, the computer needs to be turned off before they can plug the adapter card. 2. The Second step, first PCIe USB card plugged into the motherboard's PCIe slot. Use USB3.0 data cable adapter to connect the ends of the two USB ports. Plugin the power supply. 3. The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation (Note: The first time to insert card to start the computer, into the system, in general, will be prompted to install new hardware, such as "PCI standard PCI-to-PCI bridge", you need to wait for it to automatically install the complete, individual anti-virus software will prevent these files installation, note skipped), when your computer has been recognized the card, blue LED PCI slot on normal light, computer equipment manager in the system device will show an increase of several "PCI standard PCI-to-PCI bridge. After completing the above three steps, turn off the computer, plug in your PCI-E card, to be careful not to insert the contrary, Then boot into the system, install PCI-E Card Driver. Please NOTE: PCI card Do not insert anti, anti-insert can easily lead to burnout. Tips: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you